Functionality

Professional

• With the digital P.I.D. temperature control system, the preset temperature can be reached in a short period without fluctuations.
• Wide range of temperature, pressure and dwell time can meet various testing requirements.
• The test can be started manually or by pedal switch, which is convenient to operate. The anti-scald design can guarantee the safety of the operator.
• Three groups of tests with two distinct specimens can be performed each time, which improves the testing efficiency.
• The temperatures of the upper and lower sealing jaws can be controlled independently, which can meet the requirements for different test conditions.
• Hot tack test can be performed, which can meet the special requirements of the users.
• The test results can be evaluated with support of professional software.

High-end

• Embedded computer controlled system provides safer and more reliable data management as well as test operation.
• The instrument can be easily operated with a mouse, a keyboard, and a monitor, without requiring a PC.
• The instrument is equipped with four USB ports and dual Internet ports for convenient data transmission

Intelligent

• Windows-based operating interface, which is easy to learn and operate for the beginner.
• Test data can be stored in various formats, which is convenient for data transfer.
• Historical data can be searched, analyzed and printed conveniently.

Test Principle

Heat Seal Test: The compressed air is introduced into the gas cylinder with certain pressure. The embedded system can control the switching of the solenoid valve. The direction of the pressure applied will be changed so that the sealing jaws can move upward and downward. The packaging materials can be sealed at certain sealing pressure and sealing temperature within the dwell time.

Hot Tack Test: Clamp the two ends of the specimen in left sample grips and right sample grips (with load cell) respectively. Then pull the specimen to the hot tack test area. After the hot tack test, the driving mechanism will pull the left and right sample grips in opposite directions and the load cell can detect the electric signal and then the hot tack strength, peel strength and tensile strength can be analyzed or calculated.